User’s Manual of IGS-10020MT
auto : Port-based 802.1X Authentication
authorized : Port access is allowed
unauthorized: Port access is not allowed
single : Single Host 802.1X Authentication
multi : Multiple Host 802.1X Authentication
macbased : Switch authenticates on behalf of the client
(default: Show 802.1X state)
Default Setting:
none
Example:
Show the port 1 security state.
IGS-10020MT:/>security network nas state 1
Port Admin State Port State Last Source Last ID
---- ------------------ --------------------- ----------------- ------------------
1 Force Authorized Globally Disabled - -
Security Network NAS Reauthentication
Description:
Set or show Reauthentication enabledness.
Syntax:
Security Network NAS Reauthentication [enable|disable]
Parameters:
enable : Enable reauthentication
disable: Disable reauthentication
(default: Show current reauthentication mode)
Default Setting:
disable
Example:
Enable reauthentication function.
IGS-10020MT:/>security network nas reauthentication enable
419