Planet IGS-10020MT - IP NTP Server Add; IP NTP Server Ipv6 Add

User’s Manual of IGS-10020MT
Example:
Enable NTP mode:
IGS-10020MT:/>ip ntp mode enable
IP NTP Server Add
Description:
Add NTP server entry.
Syntax:
IP NTP Server Add <server_index> <ip_addr_string>
Parameters:
<server_index> : The server index (1-5)
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
Example:
To add NTP server:
IGS-10020MT:/>ip ntp server add 1 60.249.136.151
IP NTP Server IPv6 Add
Description:
Add NTP server IPv6 entry.
Syntax:
IP NTP Server Ipv6 Add <server_index> <server_ipv6>
Parameters:
<server_index>: The server index (1-5)
<server_ipv6> : IPv6 server address. IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The
symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit groups
of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For
example,'::192.1.2.34'.
354