Planet IGS-10020MT - LLDPMED Coordinates; LLDPMED Datum

User’s Manual of IGS-10020MT
475
<policy_list>: List of policies to delete
LLDPMED Coordinates
Description:
Set or show LLDP-MED Location.
Syntax:
LLDPMED Coordinates [latitude|longitude|altitude] [north|south|west|east|meters|floor] [coordinate_value]
Parameters:
latitude : Latitude, 0 to 90 degress with max. 4 digits (Positive numbers are north of the equator and negative
numbers are south of the equator).
longitude : Longitude,0 to 180 degress with max. 4 digits (Positive values are East of the prime meridian and
negative numbers are West of the prime meridian.
altitude : Altitude, Meters or floors with max. 4 digits.
(default: Show coordinate location configuration)
north|south|west|east|meters|floor:
North : North (Valid for latitude)
South : South (Valid for latitude)
West : West (Valid for longitude)
East : East (Valid for longitude)
Meters : Meters (Valid for altitude)
Floor : Floor (Valid for altitude)
lldpmed Coordinate value
coordinate_value : lldpmed Coordinate value
LLDPMED Datum
Description:
Set or show LLDP-MED Coordinates map datum.
Syntax:
LLDPMED Datum [wgs84|nad83_navd88|nad83_mllw]