User’s Manual of IGS-10020MT
Default Setting:
disable
Example:
Enable the limit mode
IGS-10020MT:/>security network limit mode enable
Security Network Limit Aging
Description:
Set or show aging enabledness.
Syntax:
Security Network Limit Aging [enable|disable]
Parameters:
enable : Enable aging
disable : Disable aging
(default: Show current enabledness of aging)
Default Setting:
disable
Example:
Enable limit aging
IGS-10020MT:/>security network limit aging enable
Security Network Limit Agetime
Description:
Time in seconds between check for activity on learned MAC addresses.
Syntax:
Security Network Limit Agetime [<age_time>]
Parameters:
<age_time>: Time in seconds between checks for activity on a MAC address (10-10000000 seconds)
(default: Show current age time)
414