Planet IGS-10020MT - IPMC Throttling

User’s Manual of IGS-10020MT
igmp: IPMC for IPv4 IGMP
<port_list>: Port list or 'all', default: All ports
enable : Enable MLD fast leave
disable: Disable MLD fast leave
(default: Show IPMC fast leave mode)
Default Setting:
disable
Example:
Enable IGMP fast leave for all port
IGS-10020MT:/>ipmc fastleave igmp 1-10 enable
IPMC Throttling
Description:
Set or show the IPMC port throttling status.
Syntax:
IPMC Throttling [mld|igmp] [<port_list>] [limit_group_number]
Parameters:
mld|igmp :
mld : IPMC for IPv6 MLD
igmp: IPMC for IPv4 IGMP
<port_list>: Port list or 'all', default: All ports
0 : No limit
1~10 : Group learn limit
(default: Show IPMC Port Throttling)
Default Setting:
Unlimited
Example:
Set the max. learn 10 groups for ICMP port throttling
IGS-10020MT:/>ipmc throttling igmp 1-10 10
524