Planet IGS-10020MT - System Log Server Address; System Location

User’s Manual of IGS-10020MT
Parameters:
<contact>: System contact string. (1-255)
Use 'clear' or "" to clear the string
In CLI, No blank or space characters are permitted as part of a contact.
clear : Clear system contact
Default Setting:
empty
Example:
To set device contact:
IGS-10020MT:/>System contact :
System Log Server Address
Description:
Show or set the system log server address.
Syntax:
System Log Server Address [<ip_addr_string>]
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
Default Setting:
empty
Example:
To set log server address:
IGS-10020MT:/> log server address 192.168.0.21
System Location
Description:
Set or show the system location.
Syntax:
System Location [<location>] [clear]
343