Planet IGS-10020MT - Firmware Command; Firmware Load; Firmware Ipv6 Load; Firmware Information

User’s Manual of IGS-10020MT
6.18 Firmware Command
Firmware Load
Description:
Load new firmware from TFTP server.
Syntax:
Firmware Load <ip_addr_string> <file_name>
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
<file_name> : Firmware file name
Firmware IPv6 Load
Description:
Load new firmware from IPv6 TFTP server.
Syntax:
Firmware IPv6 Load <ipv6_server> <file_name>
Parameters:
<ipv6_server>: TFTP server IPv6 address
<file_name> : Firmware file name
Firmware Information
Description:
Display information about active and alternate firmware images.
Syntax:
Firmware Information
Firmware Swap
Description:
Activate the alternate firmware image..
504