Planet IGS-10020MT - Loop Protect Transmit; Loop Protect Shutdown

User’s Manual of IGS-10020MT
Parameters:
enable : Enable Loop Protection
disable: Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit [<transmit-time>]
Parameters:
Transmit time interval (1-10 seconds)
Default Setting:
5
Loop Protect Shutdown
Description:
Set or show the Loop Protection shutdown time.
Syntax:
Loop Protect Shutdown [<shutdown-time>]
Parameters:
Shutdown time interval (0-604800 seconds)
A value of zero disables re-enabling the port
Default Setting:
10
518