User’s Manual of IGS-10020MT
3.3 Remote Telnet
The Remote Telnet is an IP-based command line user interface for performing system administration such as displaying
statistics or changing option settings. Using this method, you can access the Industrial Managed Switch remote telnet
interface from personal computer, or workstation in the same Ethernet environment. As long as you know the current IP address
of the Industrial Managed Switch.
Figure 3-1: Remote Telnet Interface Management
In Windows system, you may click “Start” then choose “Acessories”and “Command Prompt”, please input “telnet
192.168.0.100” and press “enter’ from your keyboard. You will see the following screen appears,
Figure 3-2: Remote Telnet Interface Main Screen of Industrial Managed Switch
For more information about using the Remote Telnet interface, refer to Chapter 5 Remote Telnet Interface Management.
44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
