EasyManuals Logo

Planet IGS-10020MT User Manual

Planet IGS-10020MT
563 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #474 background imageLoading...
Page #474 background image
User’s Manual of IGS-10020MT
interactive voice services. These devices are typically deployed on a separate VLAN for ease of
deployment and enhanced security by isolation from data applications
voice_signaling : Voice Signaling (conditional) for use in network topologies that require a different policy for the
voice signaling than for the voice media.
guest_voice : Guest Voice to support a separate limited feature-set voice service for guest users and
visitors with their own IP Telephony handsets and other similar appliances supporting
interactive voice services.
guest_voice_signaling : Guest Voice Signaling (conditional) for use in network topologies that require a different policy
for the guest voice signaling than for the guest voice media.
softphone_voice : Softphone Voice for use by softphone applications on typical data centric devices, such as
PCs or laptops. This class of endpoints frequently does not support multiple VLANs, if at
all,and are typically configured to use an untagged VLAN or a single tagged data specific
VLAN.
video_conferencing : Video Conferencing for use by dedicated Video Conferencing equipment and other similar
appliances supporting real-time interactive video/audio services.
streaming_video : Streaming Video for use by broadcast or multicast based video content distribution and other
similar applications supporting streaming video services that require specific network policy
treatment. Video applications relying on TCP with buffering would not be an intended use of
this application type.
video_signaling : Video Signaling (conditional) for use in network topologies that require a separate policy for
the video signaling than for the video media.
tagged : The device is using tagged frames
unragged : The device is using untagged frames
<vlan_id> : VLAN id
<l2_priority>: This field may specify one of eight priority levels (0 through 7), as defined by IEEE 802.1D-2004 [3].
<dscp> : This field shall contain the DSCP value to be used to provide Diffserv node behavior for the specified
application type as defined in IETF RFC 2474 [5]. This 6 bit field may contain one of 64 code point values
(0 through 63). A value of 0 represents use of the default DSCP value as defined in RFC 2475.
LLDPMED Port Policy
Description:
Set or show LLDP-MED port polcies.
Syntax:
LLDPMED port policies [<port_list>] [<policy_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
474

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet IGS-10020MT and is the answer not in the manual?

Planet IGS-10020MT Specifications

General IconGeneral
Switch typeManaged
Switch layerL2+
Quality of Service (QoS) supportYes
SFP module slots quantity2
Installed SFP modules quantity0
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity8
10G supportNo
Number of VLANs255
Networking standardsIEEE 1588, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology1000BASE-T, 100BASE-TX, 10BASE-T
Security algorithms802.1x RADIUS, SSH, SSL/TLS
Throughput14.8 Mpps
Jumbo frames9000
MAC address table8000 entries
Stackable-
CertificationFCC Part 15 Class A, CE
Product colorBlack
Housing materialAluminum
International Protection (IP) codeIP30
Power consumption (typical)10 W
Heat dissipation34 BTU/h
Operating temperature (T-T)-40 - 75 °C
Operating relative humidity (H-H)5 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth87.8 mm
Width56 mm
Height135 mm
Weight720 g

Related product manuals