Planet IGS-10020MT - Voice VLAN Security; Loop Protect Command; Loop Protect Configuration; Loop Protect Mode

User’s Manual of IGS-10020MT
517
Voice VLAN Security
Description:
Set or show the Voice VLAN port security mode. When the function is enabled, all non-telephone MAC address in Voice
VLAN will be blocked 10 seconds.
Syntax:
Voice VLAN Security [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Voice VLAN security mode.
disable: Disable Voice VLAN security mode
(default: Show flow Voice VLAN security mode)
Default Setting:
disable
Example:
Enable the Voice VLAN port security mode for port 1-4.
IGS-10020MT:/>voice vlan security 1-4 enable
6.22 Loop Protect Command
Loop Protect Configuration
Description:
Show Loop Protection configuration.
Syntax:
Loop Protect Configuration
Loop Protect Mode
Description:
Set or show the Loop Protection mode.
Syntax:
Loop Protect Mode [enable|disable]