Planet IGS-10020MT User Manual

User’s Manual of IGS-10020MT
1. INTRODUCTION
The PLANET Industrial 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch –IGS-10020MT is all multiple ports Gigabit
Ethernet Switched plus two SFP fiber optical connective ability and robust layer 2 features; the description of IGS-10020MT is
shown as below:
IGS-10020MT
Industrial 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch (-40~75 Degree C)
Terms of “Industrial Managed Switch” means the Switch mentioned titled in the cover page of this User’s Manual, i.e.
IGS-10020MT.
1.1 Packet Contents
Open the box of the Industrial Managed Switch and carefully unpack it. The box should contain the following items:
Check the contents of your package for following parts:
 The Industrial Managed Switch
x1
 Quick Installation Guide
x1
 User’s Manual CD
x1
 DIN Rail Kit
x1
 Wall Mounting Kit
X1
 Dust Cap
X10
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
1.2 Product Description
The PLANET IGS-10020MT is an Industrial 10-Port Full Gigabit Managed Ether Switch special designed to build a full
Gigabit backbone to transmit reliable but high speed data in heavy industrial demanding environments and forward data to
remote network through fiber optic. It provides 8-Port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber
optic interfaces delivered in an IP30 rugged strong case with redundant power system. Besides supports 20Gbps switch fabric
to handle extremely large amounts of video, voice and important data in a secure topology, the IGS-10020MT provides
user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions. It is the best
investment for industrial business expanding or upgrading its network infrastructure.
IPv6 / IPv4 Full-functioned Secure Switch for Building Automation Networking
The IGS-10020MT is the ideal solution to fulfill the demand of IPv6 management Gigabit Ethernet Switch, especially in the
Industrial hardened environment. It supports both IPv4 and IPv6 management functions and can work with original network
structure. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network
access control and authentication, and Secure Management features to protect customer’s industrial and building automation
network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network
architectures.
20

Planet IGS-10020MT Specifications

General

Switch type	Managed
Switch layer	L2+
Quality of Service (QoS) support	Yes
SFP module slots quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
10G support	No
Number of VLANs	255
Networking standards	IEEE 1588, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Security algorithms	802.1x RADIUS, SSH, SSL/TLS
Throughput	14.8 Mpps
Jumbo frames	9000
MAC address table	8000 entries
Stackable	-
Certification	FCC Part 15 Class A, CE
Product color	Black
Housing material	Aluminum
International Protection (IP) code	IP30
Power consumption (typical)	10 W
Heat dissipation	34 BTU/h
Operating temperature (T-T)	-40 - 75 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	87.8 mm
Width	56 mm
Height	135 mm
Weight	720 g