Planet IGS-10020MT - Aggregation Lookup; Aggregation Mode

User’s Manual of IGS-10020MT
Syntax:
Aggr Delete <aggr_id>
Parameters:
<aggr_id>: Aggregation ID
Example:
Delete Group2
IGS-10020MT:/>aggr delete 2
Aggregation Lookup
Description:
Lookup link aggregation.
Syntax:
Aggr Lookup [<aggr_id>]
Parameters:
<aggr_id>: Aggregation ID
Aggregation Mode
Description:
Set or show the link aggregation traffic distribution mode.
Syntax:
Aggr Mode [smac|dmac|ip|port] [enable|disable]
Parameters:
smac : Source MAC address
dmac : Destination MAC address
ip : Source and destination IP address
port : Source and destination UDP/TCP port
enable : Enable field in traffic distribution
disable: Disable field in traffic distribution
461