Planet IGS-10020MT - Security Switch SNMP Trap Authentication Failure; Security Switch SNMP Trap Link-Up

User’s Manual of IGS-10020MT
Example:
Set SNMP trap IPv6 destination address for 2001::0001
IGS-10020MT:/>security switch snmp trap ipv6 destination 2001::0001
Security Switch SNMP Trap Authentication Failure
Description:
Set or show the SNMP authentication failure trap mode.
Syntax:
Security Switch SNMP Trap Authentication Failure [enable|disable]
Parameters:
enable : Enable SNMP trap authentication failure
disable: Disable SNMP trap authentication failure
(default: Show SNMP trap authentication failure mode)
Default Setting:
enable
Example:
Disable SNMP trap authentication failure
IGS-10020MT:/>security switch snmp trap authentication failure disable
Security Switch SNMP Trap Link-up
Description:
Set or show the port link-up and link-down trap mode.
Syntax:
Security Switch SNMP Trap Link-up [enable|disable]
Parameters:
enable : Enable SNMP trap link-up and link-down
disable: Disable SNMP trap link-up and link-down
(default: Show SNMP trap link-up and link-down mode)
398