User’s Manual of IGS-10020MT
1. This utility show all necessary information from the devices, such as MAC Address, Device Name, firmware version, Device
IP Subnet address, also can assign new password, IP Subnet address and description for the devices.
2. After setup completed, press “Update Device”, “Update Multi” or “Update All” button to take affect. The meaning of the
3 buttons above are shown as below:
Update Device: use current setting on one single device.
Update Multi: use current setting on choose multi-devices.
Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be finding in “Option” tools bar.
3. To click the “Control Packet Force Broadcast” function, it can allow assign new setting value to the Web Smart Switch
under different IP subnet address.
4. Press “Connect to Device” button then the Web login screen appears in Figure 3-4.
5. Press “Exit” button to shutdown the planet Smart Discovery Utility.
48
To Next Page
Loading...
Need help?
General
Weight and Dimensions
