Chapter 1 Specifications
HF Series X-ray Generators - Service Manual Revision W
Quantum Medical Imaging 1-5
PHYSICAL SPECIFICATIONS
The following are physical specifications of the HF Series X-ray Generators:
GENERATOR CABINET SPECIFICATIONS
Width: 24.0 inches (609.6 mm)
Depth: 20.0 inches (508.0 mm)
Height: 34.7 inches (881.4 mm)
Weights:
Single-Phase (non-SE units): 298 lbs. (135.2 kg)
32, 40 and 50 kW Stored
Energy (SE) units: 431 lbs. (195.5 kg)
50, 65, 80 kW Three-Phase
units): 380 lbs. (712.4 kg) w/o internal HSS
388 lbs. (176.0 kg) w/internal HSS
OPERATOR CONTROL PANEL SPECIFICATIONS
Note: X-Ray Control Panels below are utilized with HF gener-
ator systems integrated with computed radiographic (CR) or
digital radiographic (DR) workstation computers (e.g., Agfa
NX, Canon CXDI, etc.).
The Q-VISION all-in-one operator control is not powered from the generator cab-
inet; it requires a separate 100-240 VAC, 3A power input.
ODYSSEY HF Control Panel:
Width: 17.9 inches (454.7 mm)
Depth: 12.25 inches (311.2 mm)
Height (without pedestal): 3.3 inches (83.8 mm)
Height (with pedestal): 36.5 inches (927.4 mm)
Weight (without pedestal): 5 lbs. (2.3 kg)
Weight (with pedestal): 25 lbs. (11.3 kg)
Q-VISION HF Control Panel:
Width: 18.7 inches (476.0 mm)
Depth (without stand): 1.9 inches (49.0 mm)
Depth (with stand): 7.125 inches (181.0 mm)
Height: 14.4 inches (365.0 mm)
Weight: 13 lbs. (5.9 kg)
SYSTEM SPECIFICATIONS
System Compatibility: Compatible with all Quantum Medical
Imaging tube stands, overhead tube
cranes, radiographic tables and wall stands
Tube Compatibility: Toshiba Models E7239X, E7242X, E7252X,
E7254X, E7255X, E7813X, E7869X
Varian Models RAD-8, RAD-13, RAD-14,
RAD-21, RAD-44, RAD-56, RAD-60,
RAD-68, RAD-74, RAD-92, A192, A272,
A292
To Next Page
Loading...
Need help?
General
