Quantum ODYSSEY HF Series User Manual

Chapter 3 Calibration
HF Series X-ray Generators - Service Manual Revision W
Quantum Medical Imaging, LLC 3-25
APR Format Setting
The APR Format Setting key (shown below) permits the operator to configure
the APR Procedure Screens to display or not display the Film Speed and/or
CM (thickness) screen fields when the generator is operated in APR mode. To
change the APR Format setting, proceed as follows:
Figure 3-20. Choosing Language and Date Format Settings
Press the key next to the APR Format field to scroll through available APR
Format options:
• All Windows - APR Procedure Screens will display both Film Speed
and CM (thickness) screen fields
• No CM - APR Procedure Screens will not display the CM (thickness)
screen field
• No FS - APR Procedure Screens will not display the film speed
screen field
• No FS, No CM - APR Procedure Screens will not display the film
speed nor the CM (thickness) screen fields
PRESS THIS
KEY TO
SELECT APR
FORMAT
SETTING

Quantum ODYSSEY HF Series Specifications

General

Brand	Quantum
Model	ODYSSEY HF Series
Category	Medical Equipment
Language	English