RADIOMETER ABL 77 Series User Manual

Chapter 6: Replacements ABL77 Service Manual
Main Housing
Main Housing Assembly
Introduction
This procedure describes the process for replacing the main housing assembly.
Replace the
main housing
assembly
Follow these steps to replace the main housing assembly (REF: 902-692).
Step Action
1.
Remove the upper module.
2.
Remove the lower module.
3.
Remove the electronics module.
4.
Remove the manifold.
5.
Replace the main housing assembly with the new assembly.
6.
Remove the manifold.
7.
Re-attach the electronics module.
8.
Re-attach the lower module.
9.
Re-attach the upper module.
6-4 Rev. F

RADIOMETER ABL 77 Series Specifications

General

Brand	RADIOMETER
Model	ABL 77 Series
Category	Measuring Instruments
Language	English