ABL77 Service Manual Chapter 9: Spare Parts
Recommended Parts and Hardware
Introduction
This section lists the miscellaneous recommended parts and hardware available for
servicing the ABL77 analyzer.
REF Qty. Description
913-747 1 disk ABL77 upgrade reconfiguration disk
902-578 1 each Zeroing cassette
920-729 1 each Valve board calibration cassette
905-674 1 kit Fluid path obstruction kit
991-264 1 tube Silicone adhesive, RTV medical grade
991-260 1 bottle Loctite #401 instant adhesive ∆
991-265 1 bottle Loctite 222 threadlocker
924-237 25 each Main housing-top cable clamp, 25 – 2.33”
924-321 5 each Main housing-top cable clamp, 5 – 2.33”
924-242 25 each Cable clamp, main top, 25 – 1.53”
924-322 5 each Cable clamp, main top, 5 – 1.53”
924-243 25 each Main housing-center cable clamp, 25 – 1.25”
924-320 5 each Main housing-center cable clamp, 5 – 1.25”
924-258 25 each Rear panel cable clamp, 25 – 0.90”
924-323 5 each Rear panel cable clamp, 5 – 0.90”
992-190 1 roll Insulating tape
993-080 36 yard roll Copper foil tape
993-081 18 yard roll Copper cloth tape
905-735 1 kit Hardware starter kit, see next pages
Continued on next page
Rev. F 9-21
To Next Page
Loading...
