RADWAG PUE HY10

242
The scale does not report an error, the measurement is stable
in the second measuring range.
• LO – the value of LO threshold in calibration/adjustment unit is returned.
• Process status – determines the status of dosing process
Decimal value of
a variable (Dec)
process status
byte no.
B1 B0
0
process disabled (inactive)
0
0
1
dosing start
0
1
2
dosing stop
1
0
3
end of dosing process
1
1
• Inputs status – determines the status of inputs in an indicator PUE HY10:
Input no. 12 11 10 9 8 7 6 5 4 3 2 1
Decimal value of
a variable (Dec)
OFF
0
0
0
0
0
0
0
0
0
0
0
0
0
ON 1 1 1 1 1 1 1 1 1 1 1 1 4094
• MIN – set value of MIN Threshold (in calibration/adjustment unit)
is returned.
• MAX – set value of MAX Threshold (in calibration/adjustment unit)
is returned.
• Lot number – response is the value of lot number (numeric range
0 - 2147483647).
• Operator – response is the value of a logged operator (numeric range
0 - 32767).
• Product – response is the value of a selected product (numeric range
0 - 32767).
• Client – response is the value of a code of a selected client
(numeric range 0 - 32767).
• Packaging – response is the value of a code of a selected packaging
(numeric range 0 - 32767).