R&S FSPN - Page 401

Remote Control
R&S
®
FSPN
401User Manual 1179.4363.02 ─ 01
Example:
CALC1:FREQ:DEV:STOP 1000
CALCulate<n>:FREQuency:DEViation:REGRession?
This command returns the data of the regression line.
Suffix:
<n>
.
irrelevant
Example:
CALC1:FREQ:DEV:REGR?
Usage: Query only
CALCulate<n>:FREQuency:DEViation:REGRession:POINts?
This command queries the number of points of the regression line.
Suffix:
<n>
.
irrelevant
Return values:
<Points>
Example:
CALC1:FREQ:DEV:REGR:POIN?
Usage: Query only
CALCulate<n>:FREQuency:DEViation:SLOPe?
This command returns the slope of the regression line. A single floating point value
with the unit Hz/s is returned.
Suffix:
<n>
.
irrelevant
Example:
CALC1:FREQ:DEV:SLOP?
Usage: Query only
11.6.9.8 Trace Configuration
Commands to configure transient analysis traces described elsewhere.
●
Trace state: DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>[:STATe]
●
Trace mode: DISPlay[:WINDow<n>]:TRACe<t>:MODE
●
Persistence: DISPlay[:WINDow<n>]:TRACe<t>:PERSistence[:STATe]
●
Decay: DISPlay[:WINDow<n>]:TRACe<t>:PERSistence:DECay
●
Trace copy: TRACe<n>:COPY
●
Trace labels: DISPlay[:WINDow<n>]:TRACe<t>:LABel[:STATe]
●
Trace labels: DISPlay[:WINDow<n>]:TRACe<t>:LABel:TEXT
●
Trace export: Chapter 11.7.3.3, "Trace Export and Import", on page 419
Common Measurement Settings