Rexroth Indramat ECODRIVE03 Series User Manual

17-4 srellortnoC evirD 30EVIRDOCExednI
DKC**.3-100-7 with CZM01.3 in "Group supply without DC bus connection" 4-32
DKC**.3-100-7 with CZM01.3 in "Single source supply" 4-32
DKC**.3-200-7 in "Central supply" 4-30
DKC**.3-200-7 in "Group supply with DC bus connection" 4-30
DKC**.3-200-7 in "Group supply without DC bus connection" 4-30
DKC**.3-200-7 in "Single source supply" 4-30
DKC**.3-200-7 with CZM01.3 and lter choke GLD12 in "Central supply" 4-35
DKC**.3-200-7 with CZM01.3 and lter choke GLD12 in "Group supply with DC
bus connection" 4-35
DKC**.3-200-7 with CZM01.3 and lter choke GLD12 in "Group supply without
DC bus connection" 4-35
DKC**.3-200-7 with CZM01.3 and lter choke GLD12 in "Single source supply"
4-35
DKC**.3-200-7 with CZM01.3 in "Central supply" 4-33
DKC**.3-200-7 with CZM01.3 in "Group supply with DC bus connection"
4-33
DKC**.3-200-7 with CZM01.3 in "Group supply without DC bus connection" 4-33
DKC**.3-200-7 with CZM01.3 in "Single source supply" 4-33
DR+, DR- 4-93
Drive address (DKC**.3-016) 5-44
Drive controller
Replacing: 15-3
Drive controller and connector
designations 4-40
designations (DKC**.3-016) 5-16
Drive enable 4-47, 5-21
Drive halt 4-47, 5-21
Drive halt (AH) and Drive enable (RF) 4-47
Drive halt (AH) and Drive enable (RF) (DKC**.3-016) 5-21
Drive package ECODRIVE03 1-1
DST transformers 10-1
E
Earth-leakage circuit breaker 11-2
ECODRIVE03 Auxiliary Bleeder Module BZM01.3 6-1
EcoX expansion interface (DKC**.3-016) 5-41
Electric Data of the Individual DKC**.3 Components 4-6
Electric Data of the Individual DKC**.3-016 Components 5-4
Electrical Connections – dependent on the drive controller type
4-97
Electrical connections - DKC**.3-016 5-16
Electrical connections - independent of the drive controller Type 4-40
Electrical data of auxiliary component BZM01.3 6-3
EMC in the Control Cabinet 12-17
Encoder - emulation 4-81
Encoder 1 4-59
Encoder 1 (DKC**.3-016) 5-29
Encoder 2 4-75
Energy circuit DKC**.3 using "central supply" as an example 4-26
E-Stop 4-54, 11-3
Exit and entrance of cooling air 12-6
Expansion interface 4-86
Extent of Delivery 13-2
F
Fault report 15-6
Fiber optic cables 4-106
Firmware (DKC**.3-016-7-FW)
Replacing 15-9
Firmware (DKC**.3-040/100/200-7-FW)
Replacing 15-7
Firmware Module
Replacing 15-8
Front view
CZM01.3 7-5
DKC 4-40
DKC**.3-016 5-16
Front view BZM01.3 6-6, 6-20
Fuse protector Q2 9-1
Fuses 11-7
customerservice@hyperdynesystems.com | (479) 422-0390

Rexroth Indramat ECODRIVE03 Series Specifications

General

Brand	Rexroth Indramat
Model	ECODRIVE03 Series
Category	Controller
Language	English