REXROTH IndraDrive C User Manual

Rexroth IndraDrive Types of Mains Connection 9-3
DOK-INDRV*-SYSTEM*****-PR02-EN-P
Note: When using the component HCS03.1E with HNK01.1 connect
the mains contactor electrically between the mains connection
and the HNK.
Note: DC bus connection of devices connected to the mains via
different mains contactors is not allowed.

REXROTH IndraDrive C Specifications

General

Protection Class	IP20
Voltage Range	200 V to 480 V
Input Voltage	200 to 480 VAC
Control Modes	Speed, Torque, Position
Communication Interfaces	PROFIBUS, CANopen, Ethernet
Feedback Systems	Resolver, incremental encoder, absolute encoder