REXROTH IndraDrive C User Manual

Rexroth IndraDrive Brief Description, Applications 4-7
DOK-INDRV*-SYSTEM*****-PR02-EN-P
4.12 Motor Filters HMF01
Applications
HMF01 motor filters are used to
• reduce the rise of the output voltage of drive controllers
• reduce leakage currents of the motor lines
• reduce interference voltage on the motor lines
The different motor filters can be used as follows:
Device type Application
HMF01.1 HMF01.1 motor filters
- are used at the motor output of HCS03 drive
controllers
Fig. 4-11: Motor filter HMF01 applications
4.13 Accessories HAS
Applications
HAS accessories are used to support the operation and combination of
components in the drive system Rexroth IndraDrive.
The different accessories and their use are described in chapter
"Accessories".
4.14 Accessory HAC01
Applications
The HAC01 accessory is used to
• insert control sections in it
• supply control sections with 24V control voltage
Device type Application
HAC01.1-002-NNN-NN used to insert CDB01 control sections
in it
Fig. 4-12: HAC01 type

REXROTH IndraDrive C Specifications

General

Protection Class	IP20
Voltage Range	200 V to 480 V
Input Voltage	200 to 480 VAC
Control Modes	Speed, Torque, Position
Communication Interfaces	PROFIBUS, CANopen, Ethernet
Feedback Systems	Resolver, incremental encoder, absolute encoder