Rexroth IndraDrive Arranging the Components in the Control Cabinet 7-3
DOK-INDRV*-SYSTEM*****-PR02-EN-P
Main Dimensions of the System Components
The main differences in the dimensions of the individual products of the
range are contained in the figure and table below.
Note: The mounting depths of the IndraDrive product range have
been optimized for mounting in control cabinets with 300 mm
or 400 mm.
The figure and table contain a rough overview of the main dimensions; for
details and required mounting dimensions see the dimension sheets of
the components.
Device Depths and Device Heights
seitenansicht_indraDrive.jpg
Fig. 7-3: Main dimensions in [mm]
To Next Page
Loading...
