REXROTH IndraDrive C User Manual

1-4 Introduction Rexroth IndraDrive
DOK-INDRV*-SYSTEM*****-PR02-EN-P
Box with Project Planning Manuals on Rexroth IndraDrive
You can order all the Project Planning Manuals on the drive system
Rexroth IndraDrive in a box; this box contains:
• Project Planning Manual Drive System
• Project Planning Manual Control Sections CSx
• Project Planning Manual Supply Units HMV01
• Project Planning Manual Power Sections HMx
• Project Planning Manual Power Sections HCS02.1
• Project Planning Manual Power Sections HCS03.1
• Project Planning Manual Additional Components
For the order number please ask our sales representative.
Standards
German, European and international technical standards are mentioned
in this documentation. Standard documents and sheets are subject to
copyright protection and Rexroth mustn't pass them on. If required,
contact the authorized sales agencies; in Germany directly contact:
BEUTH Verlag GmbH
Burggrafenstrasse 6
10787 Berlin
Tel. +49-(0)30-26 01-22 60, Fax +49-(0)30-26 01-12 60
internet: http://www.din.de/beuth
e-mail: postmaster@beuth.de
Your Feedback
Your experience is important for our improvement processes of products
and documentations.
Inform us about mistakes you discovered and change requests; we would
be grateful for your feedback.
Please send your remarks to:
Bosch Rexroth AG
Dept. BRC/EDY
Bürgermeister-Dr.-Nebel-Str. 2
D-97816 Lohr

REXROTH IndraDrive C Specifications

General

Protection Class	IP20
Voltage Range	200 V to 480 V
Input Voltage	200 to 480 VAC
Control Modes	Speed, Torque, Position
Communication Interfaces	PROFIBUS, CANopen, Ethernet
Feedback Systems	Resolver, incremental encoder, absolute encoder