5-2 Specifications for the Components of the Drive System Rexroth IndraDrive
DOK-INDRV*-SYSTEM*****-PR02-EN-P
high-voltage test routine test according to EN50178
high voltage and insulation test routine test according to EN50178
separation between control and
power voltage circuits
safe separation according to
EN50178
clearances and creepage distances according to EN50178
Fig. 5-3: Tests
Observe the following note before you carry out a high voltage test or an
applied-overvoltage withstand test.
Note: Disconnect all connections to the devices or disconnect the
plug-in connections to protect the electronic components.
Tests
Applied-Overvoltage Withstand
Test
To Next Page
Loading...
