Ricoh PRO C7210

1.SC Codes
30
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
1. Execute SP2-111-004 (Forced Line Position: Adj. Mode d).
2. If SC499 (intermediate transfer control error) has occurred, take the
appropriate measure.
3. Clean/Replace the ITB.
4. Clean/Replace the TM/ID sensor.
5. Execute SP2-154-050: MUSIC Setting: 2 Patch Pos Adjust. (Adjust the
position of the MUSIC pattern with respect to the TM/ID sensor.)
6. Replace the laser unit.
C or microcomputer