Ricoh PRO C7210 - Page 41

1.SC Codes
37
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
threshold (SP3301-031).
K
 ID Pattern adhesion (SP3-300-001)
 Lower limit threshold (SP3-301-091)
 Toner Supply Clutch cumulative time (SP3-301-041)
C
 ID Pattern adhesion (SP3-300-002)
 Lower limit threshold (SP3-301-092)
 Toner Supply Clutch cumulative time (SP3-301-042)
M
 ID Pattern adhesion (SP3-300-003)
 Lower limit threshold (SP3-301-092)
 Toner Supply Clutch cumulative time (SP3-301-043)
Y
 ID Pattern adhesion (SP3-300-004)
 Lower limit threshold (SP3-301-092)
 Toner Supply Clutch cumulative time (SP3-301-044)
S
 ID Pattern adhesion (SP3-300-005)
 Lower limit threshold (SP3-301-095)
 Toner Supply Clutch cumulative time (SP3-301-045)
Details:
This SC is issued when the toner end sensor1 continues detecting the presence of
toner falsely. The presence of toner may be detected falsely in the following
situations.
 Toner end sensor 1 cleaner spring broken
 Toner end sensor 1 cleaner spring not set correctly
 Toner end sensor 1 defective
 Toner end sensor 1 cleaner spring broken
 Toner end sensor 1 cleaner spring not set correctly
 Toner end sensor 1 defective
 Replace the sub-hopper.