Roche cobas p 512 User Manual

Part B - System description cobas p 512
2-72 Operator's Manual - Version 1.6 - 10/2015
2.7.8.4 Information system – Camera (QS I)
All the patient data available in the system is displayed in the head part of the screen the
same way it is displayed above the Orders and Targets views you can switch to using the
appropriate buttons.
Additionally, the tube images recorded by the tube recognition camera for all tubes that have
been registered and also data from the Quality Control is displayed. This feature however
only is available on systems that feature a QS I or QS I-LLD-SI module for tube recognition.
The 'Camera' view does not appear directly on opening the menu 'Routine' ▶ 'Information
system', but is switched to using the [Camera] button.
Figure 2-53: Information system menu Camera screen
A
Patient information
C
Image of the tube ("Sample Image")
B
Camera data for the selected tube
NOTICE
The fields in the upper part of the screen (Barcode – Date of birth) are the same as in the
Information system menu Orders screen, while all fields below them are specific here.
Camera data
The following information is derived from the camera module during recognition of the
tube.
Tube type
Type of the tube, for example “BD 32”. All tubes processed on the system have a unique tube
type definition assigned.
NOTICE
Consult the latest version of the "Qualified Tube List" for further information.
A
B
C

Roche cobas p 512 Specifications

General

Brand	Roche
Model	cobas p 512
Category	Analytical Instruments
Language	English