cobas p 512 Part B - 0BSystem description
Operator's Manual - Version 1.6 - 10/2015 2-73
Material no.
The material ID as configured for the identified tube type.
Quantity
Sample volume in the tube in µl. The sample volume is calculated by the system based on fill
level, sample liquid color and tube dimensions.
Class
This field gives a quality statement on the detected tube and its sample content, for example
“Serum ok”. The camera system is calibrated to assess the sample quality (only available with
the QS I module).
The value returned from the camera module differentiates between the following classes:
Return code of QS I
In case the camera's classification of the serum has failed, a return code is sent representing
the error that has occurred.
For a list of all return codes refer to chapter 'Troubleshooting'.
Number of turns
The number displayed here refers to the number of turn movements the lifting gripper had
to perform before the tube was correctly identified.
To Next Page
Loading...
Need help?
General
