Roche cobas p 512 User Manual

cobas p 512 Part E - Troubleshooting
Operator's Manual - Version 1.6 - 10/2015 5-51
Message
Description
Remedy
381
Teachin: Square
rack selected
You have selected a square
rack. You can decide whether
the rack is sorted line by line or
column by column.
382
Teachin: Rack file
does not
correspond to a
regular rack
The coordinates of the rack file
does not correspond to a
regular rack. The rack cannot
be created.
Check if the archive rack is really a regular
rack.
388
Message prior to
start of position
check
The position is moved to, after
pressing the [OK] button. If
applicable, hook the spring
back on as the Z-axis will be
switched off after attaining the
position.
389
Message after end
of position check
The input module initializes.
This message is only displayed
in the status bar.
The position saved is moved to. After
pressing the [OK] button, the idle current
is switched off again.
394
(Teasy) Start dialog
Preparations for [Teasy]. This
may only be done by trained
personnel! Input sorter, output
sorter and door in front of the
pipetting unit must be opened
and magnets must be attached
to the door sensors.
Afterwards, a module must be
selected.
444
Data buffer
overflow %
Data buffer overflow
(address=%1). !!! You may not
be able to continue working
without errors !!!
Reboot the system.
606
(Teasy) Message on
complete run
Complete run. All actuators
have been set to start position.
Press [OK] to start complete
run.
707
Reset of the menu
Confirm the message with
[OK] to reset the Teasy menu.

Roche cobas p 512 Specifications

General

Brand	Roche
Model	cobas p 512
Category	Analytical Instruments
Language	English