EasyManua.ls Logo

Rohde & Schwarz R&S SGS100A - Page 146

Rohde & Schwarz R&S SGS100A
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General instrument settings and instrument setup
R&S
®
SGS100A
146User Manual 1173.9105.02 ─ 13
"Software"
"Loaded Modules"
Software options purchased at a later stage can be activated with a keycode. The acti-
vation code is supplied with the software option. An instruction on how to install options
is described in the service manual. You can install most hardware options at an author-
ized Rohde & Schwarz service center.
Settings
Software......................................................................................................................146
Hardware / Software/WinIQSIM..................................................................................146
Loaded Modules..........................................................................................................146
Show Open Source Acknowledgments.......................................................................146
LucasFonts RSCorpid EULA.......................................................................................147
Software
Shows the software/firmware version and the version of the software platform.
Note: Your instrument is delivered with the latest firmware version available. Firmware
updates and the release notes are provided on the Internet at the download site of the
instrument's home page. This home page always offers the latest information on your
instrument, e.g. also on changes of the firmware update procedure.
Hardware / Software/WinIQSIM
The tables in the sections "Hardware" and "Software" list the installed hardware and
software options.
"Option"
Short name of the option
"Designation"
Name of the option
"Licenses"
Number of licenses
"Expiration Date"
For regular options, "Permanent" is indicated in this column. Some
options are available as trial versions. This column shows their expi-
ration date. After this date, the option is no longer available on the
instrument.
Remote command:
:SYSTem:SOFTware:OPTion<dir>:NAME? on page 300
:SYSTem:SOFTware:OPTion<dir>:DESignation? on page 299
:SYSTem:SOFTware:OPTion<dir>:LICenses? on page 300
:SYSTem:SOFTware:OPTion<dir>:EXPiration? on page 300
Loaded Modules
Section "Loaded Modules" is provided for service purposes. It lists all loaded software
modules with their versions and offers a short description of each module.
Show Open Source Acknowledgments
Accesses the list of the used open-source software packages and the corresponding
verbatim license texts.
Software / options

Table of Contents

Related product manuals