Rohde & Schwarz R&S SGS100A - Page 153

General instrument settings and instrument setup
R&S
®
SGS100A
153User Manual 1173.9105.02 ─ 13
A predefined name is indicated and can be used for network connections, see Chap-
ter 8.4.3, "Finding out the default hostname of the instrument", on page 78.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname on page 293
MAC Address
Indicates the MAC address of the network adapter.
Address Mode
Selects if the IP address is assigned automatically or manually.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
Note: Lost LAN connection to an instrument.
If the connection to an instrument configured to use static IP addresses is lost, press
the [LAN LED] on the instrument front panel.
Pressing triggers a reset of the assignment mode ("Address Mode > Auto (DHCP)".
"Auto (DHCP)"
The IP address is assigned automatically.
The network used must support automatic assignment of IP address
via DHCP or APIPA (Zeroconf) to use this function.
"Static"
The IP address is assigned manually.
Remote command:
:SYSTem:COMMunicate:NETWork:IPADdress:MODE on page 293
IP Address
Displays the IP address. To enter the IP address manually, select "Address Mode >
Static".
If there is manual input of the IP address, it is recommended that a connection of the
instrument to the network is coordinated with the network administrator. Connection
errors can affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork:IPADdress on page 292
Subnet Mask
Displays the subnet mask. To enter the subnet mask manually, select "Address Mode >
Static".
This number is used together with the IP address to identify the network segment the
instrument is in.
It is recommended that a connection of the instrument to the network is coordinated
with the network administrator. Connection errors can affect the entire network.
Remote command:
:SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK on page 294
Network settings