Rohde & Schwarz R&S SGS100A - Page 159

General instrument settings and instrument setup
R&S
®
SGS100A
159User Manual 1173.9105.02 ─ 13
Settings:
Active Adjustment Data...............................................................................................159
Calibration Value......................................................................................................... 159
Active Adjustment Data
Selects whether the factory provided or a user-defined calibration value is used to
adjust the reference oscillator.
Remote command:
:CALibration:ROSCillator:DATA:MODE on page 229
Calibration Value
Sets a user-definable calibration value.
The permanent storage of this value in the instrument's memory is a password-protec-
ted function. The parameter is restored to its permanently stored value by "Preset" and
instrument restart.
Remote command:
:CALibration:ROSCillator[:DATA] on page 229
External adjustments