BRP-Rotax
REPAIR MANUAL
ASSEMBLY OF INTAKE SILENCER
General
NNOOTTEE
Before assembly, first immerse the filter element in filter oil. Squeeze out excess
oil.
Instruction The following steps are required to install the intake silencer:
1. Assemble the components in the opposite succession as you disassembled them. See also
Chapter 6. section: Disassembly of the intake silencer.
Chapter 6
Page 12
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
To Next Page
Loading...
