Rotax 125 MAX evo Repair Manual

BRP-Rotax
REPAIR MANUAL
REMOVAL OF THE CRANKCASE
Safety
information
m WARNING
Danger of severe burns and scalds! Always allow the engine to cool down to am-
bient temperature before starting any work.
Preparation The following preparation is required before removal:
1. Removal of ignition system. See also Chapter 3).
2. Removal of the fuel line. See also Chapter 3).
3. Positioning the engine on the trestle mounting plate. See also Chapter 3).
4. Drain oil. See also Chapter 4).
5. Removal of cylinder head. See also Chapter 4).
6. Removal of carburetor. See also Chapter 6).
7. Removal of starter. See also Chapter 7).
8. Removal of radiator. See also Chapter 8).
DRAIN OIL
Instruction See Figure: Drain oil.
1. Remove the Allen screw (3) with gasket (2) from the crankcase and gearbox case.
2. Drain the oil into a suitable vessel and dispose of it in the proper manner.
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
Chapter 5
Page 5

Rotax 125 MAX evo Specifications

General

Brand	Rotax
Model	125 MAX evo
Category	Engine
Language	English