BRP-Rotax
REPAIR MANUAL
ATTENTION
Use only approved cleaning agents (e.g. kerosine, varsol, etc.) for cleaning all
metal parts.
Do not use lye-based cold cleaner or degreasing agents. Do not clean coolant or oil ho-
ses with aggressive solutions. Clean off sealing compound residue with sealant remov-
er. Soak combustion chamber, piston and cylinder head with cleaning agent and
remove combustion residues with a bronze brush. Very good results have been
achieved with “Clenvex 2000“. It is a solvent-cold cleaner, free of halogen, on the basis
of selected fuel fractions with tensides and is biologically disposable. Never use caustic
or corrosive cleaning.
Figure 2.1
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
Chapter 2
Page 7
To Next Page
Loading...
