Sam Sirius 830 - Audio Redundancy - Nucleus2 Controller Only

To Next Page

To Previous Page

Sirius 800 Series User Manual Enabling/Disabling Video/Audio Redundancy Crosspoint Modules 10.6

10.6.2 Audio Redundancy - Nucleus2 Controller Only

The audio redundant crosspoint algorithm is enabled or disabled by using the Online Editor.

See the Workbench manual for information on using the Online Editor.

Nucleus2 Controller Navigate to:

Devices | Devices[1]: LocalRouterDevice | LocalRouterControl |

RouterSpecificControl: Sirius800Control | RedundantAudioXpntControl

| Enabled = True

Select the required action from the drop down menu:

• Redundant crosspoint algorithm enabled = True

• Redundant crosspoint algorithm disabled = False

Important:

• If audio redundancy is enabled or disabled the controller must be reset for the new

setting to take effect.

• If the action on fail setting (see section 10.7) for video or audio needs to be

changed make these changes at the same time and only one database push is

then required.

• In a dual controller system both controllers must have the same redundancy

settings.

Other manuals for Sam Sirius 830