Sam Sirius 830 - Video Switching Point References

Sirius 800 Series User Manual Video Reference Inputs Product Overview 3.11
Iss 5 Rev 7 Page 44 © 2017 SAM
3.11.2 Video Switching Point References
Table 5 lists the video switching point references:
Figure 18 References Example (Nucleus2 2464/2463 Router Controller Only)
BNC Ref 1
525 59 Hz Signal
BNC Ref 2
625 50 Hz Signal
BNC Ref 3
1080P 60 Hz Signal
BNC Ref 4
Not available as the
maximum of four
references are
already in use
BNC RefInput1
525 59 Hz Signal
BNC RefInput2
625 50 Hz Signal
Derived RefInput4
720P 60 Hz Signal
Derived RefInput3
1080i 50 Hz Signal
External Video References
on the BNC Connectors
Video Reference Signals
available in the Router
Video Reference Video Signal
RefAuto
Sets the reference type based on the signal type detected on the input.
All inputs are set to RefAuto in the default database.
Ref525i59 525 interlaced 59 Hz
Ref625i50 625 interlaced 50 Hz
Ref720p60 720 progressive 60 Hz
Ref720p59 720 progressive 59 Hz
Ref720p50 720 progressive 50 Hz
Ref1080i60 1080 interlaced 60 Hz
Ref1080i59 1080 interlaced 59 Hz
Ref1080i50 1080 interlaced 50 Hz
Ref1080p60 1080 progressive 60 Hz
Ref1080p59 1080 progressive 59 Hz
Ref1080p50 1080 progressive 50 Hz
Table 5 Switching Point Video References