Sirius 800 Series User Manual 5928 Sirius 850 Standard Video Expansion Output Sirius 850: Video and Audio Expansion 12.4
Iss 5 Rev 7 Page 219 © 2017 SAM
12.4.1 5928 Sirius 850 Standard Video Expansion Output Module LEDs
Table 54 shows the LED color code on the 5928 Sirius 850 standard video expansion output
module, and Figure 143 shows the front edge of the module LEDs.
LED Color Function Detail Normal Working Status
Green Power OK Power to the card On Solid - working correctly
Yellow Command
OK
Receiving messages from
local Nucleus control
module (the Nucleus
controller in this frame)
Flashing - receiving information and
working correctly
Red Command
Error
Error with messages from
local Nucleus control
module (the Nucleus
controller in this frame)
Off - normal state
Flashing - the command message
from the router controller is corrupt or
hasn't been received.
This communications error could be
caused by a hardware failure or
incorrect insertion. Check that the
module is inserted correctly.
If the “Command Error” LED is
flashing at the same time as the
“Command OK” LED is flashing it
suggests a mismatch in the
configuration of the Nucleus
controller. Check the controller
configuration.
Table 54 5928 Sirius 850 Standard Video Expansion Output Module LED Information
Figure 143 5928 Sirius 850 Standard Video Expansion Output Module LEDs
Power OK
Command OK
Command Error
5928
To Next Page
Loading...