EasyManua.ls Logo

Sam Sirius 830 - Routing Control; Sirius 800 Input;Output Modules; Input Modules; Output Modules

Default Icon
365 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sirius 800 Series User Manual Sirius 800 Input/Output Modules Product Overview 3.3
Iss 5 Rev 7 Page 26 © 2017 SAM
3.2.3 Routing Control
The router can be controlled from Workbench Softpanels, RollCall, Panels and third party
control systems. Softpanels are usually used from a PC running LiveRunner which is a client
only version of Workbench. The client only version can’t be used for router configuration.
When Workbench Softpanel control is used the Softpanels need to connect to the Workbench
database on power-up after which they talk to the router directly. Hardware panels and
RollCall clients talk to the router directly.
Video and audio routing is achieved by the use of matrices, levels and associations. Inhibits
can be set up to prevent unwanted routes from being set and routes can be automatically or
manually protected if required. Salvos or Snapshot can be configured to bring the router back
to a known state.
The Workbench configuration tools allow you to design one or more audio mapping templates
to quickly group and name the channel order/signal types and these can then be applied to
the input and output channels as required. This method simplifies the configuration process
which makes setting up new input and output feeds quicker and less prone to errors.
3.3 Sirius 800 Input/Output Modules
3.3.1 Input Modules
The following input modules are available for the Sirius 800 routers (input modules fitted to
earlier routers are listed in Appendix C.2):
Video Input Modules
5917 - Sirius 800 Standard Video BNC/Fiber Input Module
Input connector type dependant on rear panel fitted.
5919 - Sirius 800 Video AHP Input Module with delay and Sync Capability
Input connector type dependant on rear panel fitted.
Audio Input Module
4915 - Sirius 800 AES/MADI Input Module - 120 AES Pairs and 3 MADI Input
Channels or 12 MADI (Main & Redundant)
input connector type and inputs dependant on rear panel fitted.
3.3.2 Output Modules
The following output modules are available for the Sirius 800 routers (output modules fitted to
earlier routers are listed in Appendix C.4):
Video Output Modules
5926 - Sirius 800 Standard Video Output Module (Non Expandable)
Output connector type dependant on rear panel fitted.
5938 - Sirius 850 Standard Video Output Module (Expandable)
Output connector type dependant on rear panel fitted.
5949 - Sirius 800 Video Embedding & AHP Output Module with delay and sync
capability
Output connector type dependant on rear panel fitted.
Audio Output Module
4929 - Sirius 800 AES/MADI Output Module with audio delay - 120 AES Pairs and
3 MADI Output Channels or 12 MADI (Main & Redundant)
Output connector and outputs type dependant on rear panel fitted.

Table of Contents

Other manuals for Sam Sirius 830

Related product manuals