Sam Sirius 830 - Software Compatibility Matrix; Sirius 800 Routers

Sirius 800 Series User Manual Software Compatibility Matrix Product Overview 3.6
Iss 5 Rev 7 Page 31 © 2017 SAM
3.6 Software Compatibility Matrix
3.6.1 Sirius 800 Routers
Table 2 states the compatibility between Sirius 800 router controller module versions and
SAM Workbench software releases.
Sirius 800
Router Controller Module
SAM Workbench
Software Release
2450
2462
2463
Up to 3.17.5
and
4.2 and above.
See Note 1 and Note 2.
2464
4.0.3 and above.
See Note 1 and Note 2.
Note 1: All Sirius 800 router controllers will be supported by SAM Workbench
software release 4.2.x (not yet released, as of November 2016).
Note 2: SAM Workbench software release 4.1.x is not yet available for general
release (as of November 2016).
Table 2 Sirius 800 Series Router Controller versus SAM Workbench Software Release