169
0 is the lightest and 99 is the darkest.
• The changes to this setting are linked and are changed with each of the test print
settings in the [Tools] > [Test Print] menu.
[Start Online]
Select default mode when the product is powered on.
The options are as follows:
Enabled
The product powers on in Online mode.
Disabled
The product powers on in Offline mode.
[Feed After Error]
Set whether to automatically feed the media when recovering from an error and changing to Online
mode.
The options are as follows:
Enabled
Feed the media when changing to Online mode after recovering from an error.
Disabled
Do not feed the media when changing to Online mode after recovering from an error.
However, if [Feed At Power On] is set to [Enabled], the product feeds the media when it is
powered on and changes to Online mode.
Also, if [Auto Measure] is enabled, the product feeds the media when it changes to Online mode
for the first time after being powered on.
[Feed At Power On]
Set whether to automatically feed the media when the product is powered on.
The options are as follows:
Enabled
Feed the media when the product is powered on.
Disabled
Do not feed the media when the product is powered on.
However, if [Auto Measure] is enabled, the product feeds the media when it changes to Online
mode for the first time after being powered on.
[Finisher Feed]
Set the media feed amount for dispense stop. Set the media feed amount based on the print head
position of 0.
To Next Page
Loading...