183
[Username]
Set the username if you need a username to connect to the proxy server.
You can enter 1 to 8 characters. Alphabets (capital and small letters) and numbers can be used.
• To set the username, [Server] should be set.
[Password]
Set the password if you need a password to connect to the proxy server.
You can enter 1 to 16 characters. Alphabets (capital and small letters), numbers and symbols can be
used.
• Some symbols cannot be used. If you enter a symbol that cannot be used, [Invalid
value] appears on the screen.
• To set the password, [Server] should be set.
[Exclude]
Set names, IP addresses or domains for the proxy to exclude.
• Exclude must contain at least 127.0.0.1 and localhost.
[DHCP Options]
Set the DHCP options for the LAN.
[DHCP Options] can be set only if you have selected [DHCP] in the [IPv4] > [Mode] menu or [IPv6] >
[Mode] menu.
The setting items are as follows:
[Update DNS (Option 81)]
Enable or disable the use of DHCP server option 81.
The options are as follows:
Enabled
Enable the use of DHCP server option 81.
Disabled
Disable the use of DHCP server option 81.
[Hostname]
Set the hostname.
You can enter 0 to 255 characters. Alphabets (capital and small letters), numbers and symbols can be
used.
To Next Page
Loading...