SATO S84NX - Page 186

[Network]
186
Auto
Automatically generate the IP address and gateway (stateless mode).
DHCP
Automatically retrieve the IP address and gateway from the DHCP server (stateful mode).
Static
Manually set the IP address, gateway and prefix length.
[DHCP]
Update the lease time and get the IP address from the DHCP server again.
Appears only if you have selected [DHCP] in the [Mode] menu.
Does not appear if LAN is the active interface.
[IP Address]
If you have selected [Static] in the [Mode] menu, set the IP address.
The setting range is as follows:
0:0:0:0:0:0:0:1 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[Prefix Length]
If you have selected [Static] in the [Mode] menu, set the prefix.
The setting range is from 1 to 128.
[Gateway]
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[DNS]
If you have selected [Static] in the [Mode] menu, set the primary address of the DNS server.
The setting range is as follows:
0:0:0:0:0:0:0:0 to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
• You can register only one IP address for the DNS server for IPv6.
[Proxy]
Configure the proxy for Wi-Fi.
The setting items are as follows:
[Enabled]
Enable or disable use of proxy.
The options are as follows: