231
Enabled
Enable the RSSI filter function.
Disabled
Disable the RSSI filter function.
[Threshold Value]
Set the threshold value for the RSSI filter.
Appears only if [Enabled] is selected in the [RSSI Filter] menu.
The setting range is from -99 to -1 dBm.
[Retry Mode]
Set whether to retry encoding of failed data when an RFID error occurs.
The options are as follows:
Retry
If an RFID error occurs, the product will retry writing according to the number of times of [Retries].
If the RFID errors occur consecutively, printing stops after the number of retries in [Retries] plus
one more retry occur, and the RFID error screen opens.
Pressing the button (RETRY) retries writing the number of times in [Retries].
Pressing the button (ABORT) deletes one current item.
Release
If an RFID error occurs, the next data is written, without trying to write the same data again. If the
RFID errors occur consecutively, printing stops after the number of retries in [Retries] occurs, and
the RFID error screen opens.
Pressing the button (RETRY) deletes one copy of the current print data, and then starts
printing the next.
Example:
◦ If one copy each of 10 items are being printed, the current item is deleted, and the remaining
items are printed.
◦ If 10 copies of one item are being printed, the current print data is deleted, and the remaining
copies are printed.
To Next Page
Loading...