SATO S84NX - Page 234

[RFID] (S84NX Only)
234
• [100 ms]
• [200 ms]
• [300 ms]
• [400 ms]
• [500 ms]
[Counters]
Shows the RFID counter.
RFID writing operations by the following commands are counted.
• RFID write: EPC code write <IP0> command
• Tag data print: UID/EPC/IDm print <TU> command
However, writing that is not accompanied by printing and media feeding is not counted.
The display items are as follows:
[Life]
Shows the number of RFID write successes, failures, and total attempts.
The display items are as follows:
Count Success
Shows the total number of successful times you have written to an RFID tag.
Count Failure
Shows the total number of RFID write errors.
Count Total
Shows the total number of times you have written to an RFID tag.
This is the total number including [Count Success] and [Count Failure].
[User]
Shows the number of RFID write successes, failures, and total attempts after the RFID counter is
cleared.
The display items are as follows:
Count Success
Shows the total number of successful times you have written to an RFID tag after the RFID
counter is cleared.
Count Failure
Shows the total number of RFID write errors after the RFID counter is cleared.
Count Total
Shows the total number of times you have written to an RFID tag after the RFID counter is
cleared.
This is the total number including [Count Success] and [Count Failure].