Segway VILLIAN SSV Series - Install Drive Pulley and Driven Pulley

CVT SYSTEM
3-6-10
Install drive pulley and driven pulley
◆
Install the CVT driven pulley
【
B
】
on the gearbox
shaft, and lock the CVT driven pulley
【
B
】
with the
CVT stop tool
【
A
】
.
◆
Install the washer
【
C
】
and the driven pulley bolt
【
D
】
, and tighten the driven pulley bolt
【
D
】
according to the torque.
◆
Tightening torque
Driven pulley bolt
80 N
•
m (8.2 kgf
•
m, 59 ft
•
lb)
◆
Use oil-free cleaning fl uids such as trichloroethylene
or acetone to clean the following parts:
Crankshaft cone
【
E
】
Cone surface of driving wheel
【
F
】
!
WARNING
WARNING
These cleaning fluids are usually highly flammable,
and long-term inhalation is harmful to the body. Make
sure to follow the safety warnings of the cleaning fl uid
manufacturer.
◆
Install the CVT driving pulley
【
G
】
, install the
washer
【
H
】
and the driving pulley bolt
【
I
】
.
◆
Use the CVT anti-rotation tool to fix the CVT drive
pulley, tighten the drive pulley bolt
【
I
】
to the
specified torque, and tighten the drive pulley bolt
counterclockwise.
◆
Tightening torque
Drive pulley bolt
120 N
•
m (12.2 kgf
•
m, 88.5 ft
•
lb)
H
H
I
I
A
A
B
B
C
C
D
D
F
F
E
E
G
G