Segway VILLIAN SSV Series - Disassembly of the Front Section of the Drive Shaft

8 - 4
DRIVE SYSTEM
DISASSEMBLY OF THE FRONT SECTION OF THE DRIVE SHAFT
【A】 plastic parts
【B】 Bearing seat bolt
【C】 bearing seat
【D】 the middle part of the drive shaft
◆ Disassemble the plastic part【A】
◆ Disassemble the middle part of the drive shaft
Bearing seat bolt 【B】
◆ Take out both ends of bearing seat 【C】
◆ Then the whole back exit the middle part of the drive
shaft 【D】, so as to separate from the front drive
shaft;
A
B
C
D